Renault Laguna III Manual page 1294

Alternator: Removal - Refitting
V4Y
Special tooling required
Ms. 583 Pipe clamps.
Mot. 1448 Remote operation pliers for
hose clips.
Equipment required
safety strap(s)
Tightening torquesm
alternator nut
alternator upper bolt
positive terminal nut on
the alternator
bolts of the air condi-
tioning compressor
bolts of the air condi-
tioning compressor
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove:
- the engine cover,
- the engine undertray bolts,
- the engine undertray,
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (55A, Ex-
terior protection),
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) .
STARTING - CHARGING
83 N.m
28 N.m
15 N.m
55 N.m
61 N.m
a Remove the bolts (1) from the air conditioning com-
pressor.
a Move aside the air conditioning compressor.
a Attach the air conditioning compressor to the body
using a safety strap(s).
a Fit the tool (Ms. 583) between the oil-water heat ex-
changer rigid inlet pipe and the oil-water heat ex-
changer.
16A-17
16A
133870
133871