Renault Laguna III Manual page 1676

Particle filter pressure sensor: Removal - Refitting
K9K, and 782
a Remove:
- the particle filter pressure sensor nut (4) ,
- the particle filter pressure sensor:
REFITTING
I - REFITTING PREPARATION OPERATION
a If reusing the particle filter pressure sensor, coat the
sensor take-off pipe with COPPER ANTI-SEIZE
AGENT or COPPER-ALUMINIUM LUBRICANT
(see Vehicle: Parts and consumables for the re-
pair) (04B, Consumables - Products).
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the particle filter pressure sensor.
a Connect the particle filter pressure sensor connec-
tor.
a Fit without tightening the take-off pipe of the particle
filter pressure sensor.
a Refit the bolt of the particle filter pressure sensor.
a Torque tighten the particle filter pressure sensor
take-off pipe (21 N.m).
III - FINAL OPERATION
a Refit the engine undertray.
EXHAUST
144214
19B-110
19B