Renault Laguna III Manual page 1246

Exhaust gas cooler: Removal - Refitting
K9K, and 780
a Refit:
- the air inlet metal tube fitted with new seals,
- the lifting eye on the timing end,
- the « timing end lifting eye - air inlet metal tube »
assembly bolts
- the injector rail protector bracket bolts.
a Connect the exhaust gas recirculation solenoid
valve connector.
a Refit the damper valve (see 12A, Fuel mixture,
Damper valve: Removal - Refitting, page 12A-39)
.
a Fit:
- the intercooler air inlet pipe,
- the clip on the intercooler inlet air pipe in its original
position.
a Refit:
- the nut on the intercooler air inlet pipe,
- the bolt on the intercooler air inlet pipe,
- the oil vapour rebreathing pipe .
a Connect the oil vapour rebreathing pipe:
- to the oil vapour rebreathing valve,
- on the air filter box air outlet pipe.
a Refit:
- the catalytic converter (see 19B, Exhaust, Cata-
lytic converter: Removal - Refitting, page 19B-
32) ,
- the engine undertray,
- the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Fill and bleed the cooling system (see 19A, Cool-
ing, Cooling system: Draining - Refilling, page
19A-16) .
ANTIPOLLUTION
14A-45
14A