Renault Laguna III Manual page 1129

Injector rail: Removal - Refitting
M9R
II - REMOVAL OPERATION FOR PART
CONCERNED
a Disconnect:
- the rail pressure regulator connector (4) ,
- the heater plug connectors (5) .
a Disconnect the rail pressure sensor connector (6) .
a Remove the engine harness mounting bolts on the
cylinder head.
a Move aside the engine harness mounting and the
engine harness.
DIESEL INJECTION
123617
123620
13B-190
a Remove:
- the injector rail bolts (7) ,
- the injector rail,
- the injector rail seal.
REFITTING
I - REFITTING PREPARATIONS OPERATION
a
WARNING
Do not remove the blanking plugs from each
component until the last moment.
Also, do not remove the components from their
packaging until they are to be fitted to the vehi-
cle.
a always replace the intercooler air inlet pipe seal.
13B
123621