Renault Laguna III Manual page 1648

Particle filter: Removal - Refitting
K9K, and 782
Special tooling required
Mot. 1807 Spanner for tightening the
exhaust gas temperature sen-
sor
Equipment required
component jack
Tightening torquesm
exhaust bracket nuts
particle filter pressure
sensor take-off pipe
take-off pipe of the parti-
cle filter temperature
sensor
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove the engine undertray.
EXHAUST
21 N.m
21 N.m
44 N.m
a Unclip the wiring (1) of the particle filter temperature
sensor.
a Remove the take-off pipe (2) from the particle filter
temperature sensor using the tool (Mot. 1807).
a Remove the take-off pipe (3) from the particle filter
pressure sensor.
19B-82
19B
144218
144217