Renault Laguna III Manual page 1566

Coolant temperature sensor: Removal - Refitting
V9X
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the coolant temperature sensor connec-
tor (4) .
a Remove:
- the coolant temperature sensor clip,
- the coolant temperature sensor,
- the coolant temperature sensor seal.
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: coolant tempera-
ture sensor seal (10,06,01,18).
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- a new seal on the coolant temperature sensor,
- the coolant temperature sensor,
- the coolant temperature sensor clip.
a Connect the coolant temperature sensor connector.
III - FINAL OPERATION
a Refit the air outlet pipe onto the air filter unit.
a Connect the oil vapour rebreathing pipe to the air
pipe.
COOLING
a Clip on the vacuum pipes of the turbocharger control
solenoid valve.
a Torque tighten the air filter unit air outlet pipe
clips (6 N.m).
a Fill and bleed the cooling system (see 19A, Cool-
ing, Cooling system: Draining - Refilling, page
19A-16) .
a Refit:
- the engine undertray,
- the engine cover.
133901
19A-178
19A