Renault Laguna III Manual page 1976

Hydraulic distributor wiring: Removal - Refitting
F4R, and AJ0
a Fit the clips onto the automatic gearbox oil cooler
hoses using the tool (Mot. 1448).
a Refit:
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
- the battery (see Battery: Removal - Refitting)
(80A, Battery),
- the front left-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (55A, Ex-
terior protection),
- the front left-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres).
a Fill up and bleed the cooling system (see Cooling
system: Draining - Refilling) (19A, Cooling).
a Top up the automatic transmission (see 23A, Auto-
matic gearbox, Automatic gearbox oil: Draining -
Filling, page 23A-29) .
a Refit the engine undertray.
a Apply the After repair procedure using the Diagnos-
tic tool :
- connect the diagnostic tool,
- select « Gearbox computer » ,
- go to repair mode,
- display the « before/after repair procedure » for the
computer selected,
- select « Hydraulic distributor » in the section « List
of components controlled by this computer » ,
- carry out the operations described in the « After re-
pair procedure » section.
AUTOMATIC GEARBOX
23A-58
23A