Renault Laguna III Manual page 1593

Catalytic pre-converter: Removal - Refitting
V9X
a Remove the clip (1) from the turbocharger cooling
hose using the (Mot. 1448).
a Disconnect the turbocharger cooling hose.
Note:
Apply SUPER RELEASING AGENT (see Vehi-
cle: Parts and consumables for the repair)
(04B, Consumables - Products) to the turbo-
charger studs to prevent the studs from breaking
when the nuts are undone.
a Remove:
- the nut (2) on the turbocharger rigid cooling pipe,
- the turbocharger heat shield nuts (3) .
a Loosen the nut (4) on the turbocharger heat shield.
a Remove the lower engine tie-bars (see 19D, Engine
mounting, Lower engine tie-bar: Removal - Refit-
ting, page 19D-85) .
EXHAUST
134225
a Unclip the crankshaft position sensor wiring (5) from
the catalytic pre-converter lower stay.
a Remove the nuts (6) from the catalytic pre-converter
lower stay.
19B-27
19B
138351