Renault Laguna III Manual page 1525

Thermoplunger unit: Removal - Refitting
K9K, and 782
Special tooling required
Ms. 583 Pipe clamps.
Mot. 1448 Remote operation pliers for
hose clips.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove the engine undertray.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Pinch the pipes of the thermoplunger unit using the
tools (Ms. 583) (1) .
a Separate the clips (2) on the thermoplunger unit
pipes using the tool (Mot. 1448).
a Disconnect the pipes from the thermoplunger unit.
COOLING
a Disconnect the connector (3) from the thermoplung-
er unit.
144221
a Remove:
- the thermoplunger unit bolts (4) ,
- the thermoplunger unit.
19A-137
19A
144220
144219