Renault Laguna III Manual page 1966

Hydraulic distributor: Removal - Refitting
V9X, and AJ0
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace:
- the hydraulic distributor O-rings,
- the hydraulic distributor housing seal,
- the intercooler air inlet pipe seal.
a Clean the joint faces using SURFACE CLEANER
(see Vehicle: Parts and consumables for the re-
pair) (04B, Consumables - Products) on the auto-
matic gearbox and on the hydraulic distributor
housing, taking care not to damage the contact sur-
faces.
a Remove the intercooler air inlet pipe seal on the in-
tercooler side using a tweezers.
AUTOMATIC GEARBOX
115068
a
Note:
Check that the seal of the intercooler air inlet
pipe on the intercooler side is fitted the right way
round.
a Refit a new seal to the intercooler air inlet pipe on
the intercooler side.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the new hydraulic distributor O-rings.
23A-48
23A
115069