Renault Laguna III Manual page 1515

Engine cooling fan assembly: Removal - Refitting
K9K
Equipment required
indelible pencil
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (MR 415, 80A, Battery).
a Remove the front engine cover.
a Disconnect the engine cooling fan assembly con-
nectors.
a Disconnect the connector (1) from the air condition-
ing pressostat.
a Unclip:
- the air conditioning pressostat wiring,
- the fan assembly wiring,
- the fan assembly cooling hoses.
a Remove:
- the fan assembly wiring,
- the fan assembly cooling hoses.
COOLING
a Remove:
- the front wheels (see Wheel: Removal - Refitting)
- the front wheel arch liners (see Front wheel arch
- the engine undertray bolts,
- the engine undertray,
- the radiator mounting cross member (see Radiator
- the intercooler (see 12B, Turbocharging, Inter-
II - REMOVAL OPERATION FOR PART
CONCERNED
a
a Unclip the cooling fan assembly from the cooling ra-
diator from beneath the vehicle.
a Remove the engine cooling fan assembly from un-
derneath the vehicle.
123479
19A-127
(MR 415, 35A, Wheels and tyres),
liner: Removal - Refitting) (MR 416, 55A, Exterior
protection),
mounting cross member: Removal - Refitting)
(MR 416, 41A, Front lower structure),
cooler: Removal - Refitting, page 12B-59) .
Note:
Insert a cardboard protector between the cooling
radiator and the fan assembly to protect the cool-
ing radiator vanes.
19A