Renault Laguna III Manual page 1479

Thermostat: Removal - Refitting
M4R
REMOVING THE WATER CHAMBER
THERMOSTAT
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Remove:
- the engine cover,
- the engine undertray bolts,
- the engine undertray.
a Drain the cooling system (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-16) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the water chamber (see 19A, Cooling, Wa-
ter chamber: Removal - Refitting, page 19A-100) .
a Remove the thermostat (5) .
REFITTING THE WATER CHAMBER
THERMOSTAT
I - REFITTING PREPARATION OPERATION
a Always replace the thermostat seal at the water
chamber.
COOLING
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the water chamber thermostat following the direc-
- the water chamber (see 1 9 A, Cooling, Water
III - FINAL OPERATION.
a Fill the cooling system (see 19A, Cooling, Cooling
system: Draining - Refilling, page 19A-16) .
a Refit:
- the engine cover,
- the engine undertray,
- the engine undertray bolts.
a Tighten the engine undertray bolts.
116008
19A-91
tion indicated in the diagram,
chamber: Removal - Refitting, page 19A-100) .
19A
115157