Renault Laguna III Manual page 1148

Rail pressure sensor: Removal - Refitting
M9R
a Refit the rail pressure sensor.
a Torque tighten the rail pressure sensor (80 Nm).
a Connect the rail pressure sensor.
II - FINAL OPERATION.
a Refit the rail protector.
a Clip the intercooler air inlet pipe to the turbocharger.
Note:
Check that the intercooler air inlet pipe is cor-
rectly clipped on.
a Fit the cooling radiator top hose.
a Refit:
- the intercooler air inlet pipe bolts on the intake dis-
tributor,
- the cooling radiator top hose nut on the intercooler
air inlet pipe.
a Tighten:
- the intercooler air inlet pipe bolts on the intake dis-
tributor,
- the cooling radiator top hose nut on the intercooler
air inlet pipe.
a Refit the engine cover.
DIESEL INJECTION
13B-209
13B