Renault Laguna III Manual page 1286

Alternator: Removal - Refitting
K9K
a Remove the bolts (11) from the alternator.
a Move the alternator away from the multifunction sup-
port using a screwdriver.
a Remove the alternator.
REFITTING
I - REFITTING PREPARATION OPERATION
a Compress the alternator rings (12) using pliers and a
vice to facilitate fitting.
STARTING - CHARGING
123831
18987
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the alternator.
a Connect:
- the alternator regulator connector,
- the positive terminal on the alternator.
a Refit the positive terminal nut on the alternator.
a Torque tighten the positive terminal nut on the al-
ternator (8 N.m).
III - FINAL OPERATION
K9K, and 782
a Refit the alternator protector.
a Clip the alternator wiring to the rail protector.
a Fit:
- the clips of the intercooler air inlet pipe in their orig-
inal positions,
- the intercooler air inlet pipe.
a Clip the intercooler air inlet pipe onto the intercooler.
a Refit the engine undertray.
a Clip the intercooler air inlet pipe on the turbocharger.
a Refit:
- the nut on the intercooler air inlet pipe,
- the bolt on the intercooler air inlet pipe.
a Refit:
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) ,
- the front end panel (see Front end panel: Remov-
al - Refitting) (42A, Upper front structure),
- the headlights (see Headlight: Removal - Refit-
ting) (80B, Headlights),
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
- the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres),
- the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
16A-9
16A