Renault Laguna III Manual page 1750

Left-hand suspended engine mounting: Removal - Refitting
M4R
a
Note:
The positioning of the retaining shoe (10) of the
tool (Mot. 1672) must be the same as illustrated
above.
a Fit the retaining shoe (Mot. 1672) of the tool (10) un-
der the sump.
a Adjust the retaining shoe of the tool (Mot. 1672) un-
der the sump.
ENGINE MOUNTING
128254
19D-4
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the central nut (11) from the suspended engine
mounting rubber pad shaft on the gearbox,
- the nuts (12) from the suspended engine mounting
rubber pad on the gearbox.
a Slightly lower the engine until the rubber pad detach-
es from the suspended engine mounting on the
gearbox.
a Remove the rubber pad of the suspended engine
mounting from the gearbox.
19D
123457