Renault Laguna III Manual page 1169

Diesel injector: Removal - Refitting
M9R
- the high pressure pipes between the rail and the in-
jector (see 13B, Diesel injection, High pressure
pipe between rail and injector: Removal - Refit-
ting, page 13B-161) .
a
WARNING
T o prevent impurities from entering the circuit,
place protective plugs on all fuel circuit compo-
nents exposed to the open air.
a Insert the blanking plugs.
DIESEL INJECTION
123590
13B-230
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Mark the injectors in relation to the cylinders using a
indelible pencil.
Note:
Cylinder number 1 is located on the timing end.
a Remove:
- the injector clamp bolts (4) ,
- the injector clamps.
- the injectors one by one.
a Remove the heat protection washer.
Note:
If the heat protection washer is stuck at the bot-
tom of the well, use the (Mot. 1817) (see Injec-
tor well cleaning tool: Use) (Technical Note
6040A, 13B, Diesel injection).
13B
123591