Renault Laguna III Manual page 1006

High pressure pump: Removal - Refitting
M9R, and 744 or 748 or 754 or 800 or 802 or 805 or 806 or 808 or 809 or 816 or 845 or 849
Equipment required
tweezers
Tightening torquesm
high pressure pump pin-
ion nut
IMPORTANT
Consult the safety and cleanliness advice and oper-
ation recommendations before carrying out any
repair (see 13B, Diesel injection, Diesel injec-
tion: Precautions for the repair, page 13B-1) .
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove the front engine cover.
a Remove the nut (1) from the radiator top hose on the
intercooler air inlet pipe.
a Remove the radiator top hose.
a Remove the bolts (2) from the intercooler air inlet
pipe on the inlet distributor.
DIESEL INJECTION
90 N.m
122430
13B-67
a Rotate the intercooler air inlet pipe clip (3) at the tur-
bocharger end.
a Disconnect the intercooler air inlet pipe on the turbo-
charger side.
a Move the intercooler inlet air pipe to one side.
a Remove:
- the injector rail protector (see 13B, Diesel injec-
tion, Injector rail protector: Removal - Refitting,
page 13B-126) ,
- the air filter unit (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) ,
- the high pressure pipe between the pump and the
rail (see 13B, Diesel injection, High pressure
pipe between pump and rail: Removal - Refit-
ting, page 13B-140) .
13B
113282