Renault Laguna III Manual page 1085

High pressure pipe between pump and rail: Removal - Refitting
M9R, and 744 or 748 or 754 or 800 or 802 or 805 or 806 or 808 or 809 or 816 or 845 or 849
- the air pipe seal at the intercooler inlet on the turbo-
charger side.
a Remove the intercooler air inlet pipe seal on the tur-
bocharger side using a tweezers.
DIESEL INJECTION
115068
13B-146
a
Note:
Check that the intercooler air inlet pipe seal is fit-
ted in its groove the right way round.
a Fit a new seal to the intercooler air inlet pipe on the
turbocharger side.
a Turn the clip for the intercooler air inlet pipe in order
to refit it in its groove.
WARNING
Before fitting a new high pressure pipe, lightly
lubricate the nut threads with the oil from the
applicator provided in the new parts kit.
Be careful not to allow oil into the high pressure
pipe.
Do not lubricate high pressure pipes supplied
without an applicator, as these high pressure
pipes are self-lubricating.
WARNING
Do not remove the blanking plugs from each
component until the last moment.
Also, do not remove the components from their
packaging until they are to be fitted to the vehi-
cle.
13B
115069