Renault Laguna III Manual page 1383

Injector rail - Injectors: Removal - Refitting
M4R
a Torque tighten in order the injector rail bolts (25
N.m).
III - FINAL OPERATION.
a Connect the connector on each injector.
a Remove the blanking plugs.
a connect the fuel supply pipe union on the injector
rail.
a Refit:
- the intake distributor (see 12A, Fuel mixture, Inlet
distributor: Removal - Refitting, page 12A-75) ,
- the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Apply the after repair procedure using the Diagnos-
tic tool :
- connect the Diagnostic tool,
- select « injection computer » ,
- go to repair mode,
- display the « before/after repair procedure » for the
computer selected,
- select « injector no. 1 » in the « List of components
controlled by this computer » section,
- carry out the operations described in the « After re-
pair procedure » section.
PETROL INJECTION
123362
17B-45
17B