Renault Laguna III Manual page 1135

Injector rail: Removal - Refitting
V9X
- the front wheel arch liners (see Front wheel arch
liner: Removal - Refitting) (55A, Exterior protec-
tion),
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
- the injector rail protector on the front row (see 13B,
Diesel injection, Injector rail protector: Remov-
al - Refitting, page 13B-126) ,
- the high pressure pipes between the rail and injec-
tor of the front row (see 13B, Diesel injection,
High pressure pipe between rail and injector:
Removal - Refitting, page 13B-161) ,
- the high pressure pipe between the pump and the
rail (see 13B, Diesel injection, High pressure
pipe between pump and rail: Removal - Refit-
ting, page 13B-140) .
a Drain the cooling system (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-16) .
a Remove the high pressure pipe between the rails
(see 13B, Diesel injection, High pressure pipe
between rails: Removal - Refitting, page 13B-
184) .
a Remove the bolts (1) from the oil vapour recircula-
tion diaphragm.
a Remove the oil vapour recirculation diaphragm.
DIESEL INJECTION
134028
13B-196
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the connector (2) from the fuel pressure
regulator of the injector rail on the front row.
a Move aside the fuel pressure regulator wiring from
the injector rail of the front row.
a Remove:
- the bolts (3) from the injector rail on the front row,
- the injector rail on the front row,
- the seals from the injector rail on the front row.
13B
137861
137862