Renault Laguna III Manual page 1090

Table of Contents

Advertisement

High pressure pipe between pump and rail: Removal - Refitting
K9K, and 780
- the silver high pressure pipe unions between
the pump and the rail (28 Nm).
III - FINAL OPERATION.
a Refit:
- the rail protector,
- the rail protector bolt,
- the rail protector nuts.
a Tighten:
- the rail protector bolt,
- the rail protector nuts.
a Refit the rail protector drain pipe.
a Fit the injection wiring on the rail protector.
a Refit the injection wiring bracket nut.
a Tighten the injection wiring bracket nut.
a Clip on the injection wiring clip.
a Connect:
- the fuel temperature sensor connector,
- the flow regulation solenoid valve connector,
- the pressure regulation solenoid valve connector,
- the diesel injector connectors,
- the heater plug connectors.
a Refit:
- the dipstick well,
- the dipstick well bolts.
a Tighten the dipstick well bolts.
a Refit the dipstick.
a Refit:
- the injector rail protector cover,
- the injector rail protector cover nut,
- the injector rail protector cover bolt.
a Tighten:
- the injector rail protector cover nut,
- the injector rail protector cover bolt.
a Clip on the injector rail protector cover.
a Fit:
- the intercooler air inlet pipe,
- the intercooler air inlet pipe clip in its original posi-
tion.
a Clip the intercooler air inlet pipe to the turbocharger.
DIESEL INJECTION
13B-151
a Refit:
- the nut to the intercooler air inlet pipe,
- the intercooler air inlet hose bolt.
a Tighten:
- the nut to the intercooler air inlet pipe,
- the intercooler air inlet hose bolt.
a Clip the electrical wiring on the injector rail protector
cover.
a Connect:
- the camshaft position sensor connector,
- the damper valve connector,
- the intercooler air outlet pipe on the damper valve.
a Tighten the intercooler air outlet pipe clip.
a Connect the battery (see Battery: Removal - Refit-
ting) (MR 415, 80A, Battery).
a Refit the engine cover.
a Reprime the fuel circuit using the manual priming
pump.
a Check that there are no diesel leaks (see 13B, Die-
sel injection, High pressure pipe: Check, page
13B-134) .
13B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents