Renault Laguna III Manual page 1780

Left-hand suspended engine mounting: Removal - Refitting
V4Y
a
Note:
The positioning of the retaining shoe (12) of the
tool (Mot. 1672) must be the same as illustrated
above.
a Fit the retaining shoe of the tool (Mot. 1672) under
the gearbox casing.
a Adjust the retaining shoe of the tool (Mot. 1672) un-
der the gearbox casing.
ENGINE MOUNTING
134932
19D-34
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the central nut (13) from the suspended engine
mounting support shaft on the gearbox,
- the bolts (14) of the rubber pad of the suspended
engine mounting from the gearbox.
a Slightly lower the engine until the support shaft de-
taches from the suspended engine mounting on the
gearbox.
a Remove the rubber pad of the suspended engine
mounting from the gearbox.
19D
134185
134533