Renault Laguna III Manual page 1460

Coolant pump: Removal - Refitting
M9R
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the coolant pump pulley bolts (2) ,
- the coolant pump pulley.
a Remove:
- the coolant pump bolts (3) ,
- the coolant pump,
- the coolant pump seal.
COOLING
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: coolant pump seal
(10,06,01,21).
a Clean the joint faces using SURFACE CLEANER
123622
(see Vehicle: Parts and consumables for the re-
pair) (04B, Consumables - Products).
123623
19A-72
WARNING
Do not scrape the joint faces of the aluminium,
any damage caused to the joint face will result in
a risk of leaks.
IMPORTANT
Wear goggles with side protectors for this opera-
tion.
IMPORTANT
Wear protective gloves during the operation.
WARNING
To ensure proper sealing, the gasket surfaces
must be clean, dry and not greasy (avoid any fin-
ger marks).
19A