Renault Laguna III Manual page 1322

V4Y
Tightening torquesm
starter bolts
positive terminal nut
bolt of the starter earth
strap
starter excitation termi-
nal nut
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove:
- the engine undertray bolts,
- the engine undertray.
STARTING - CHARGING
Starter: Removal - Refitting
44 N.m
8 N.m
21 N.m
5 N.m
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the positive terminal nut (1) ,
- the excitation terminal nut (2) ,
- the earth strap bolt (3) .
a Move the starter wiring aside.
a Remove:
- the starter bolts (4) ,
- the starter.
REFITTING
I - REFITTING PREPARATION OPERATION
a Check that the centring dowel is in place.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the starter.
a Torque tighten the starter bolts (44 N.m).
a Fit the starter wiring.
a Refit the positive terminal nut.
a Torque tighten the positive terminal nut (8 N.m).
a Refit the starter earth strap.
a Torque tighten the bolt of the starter earth strap
(21 N.m).
16A-45
16A
22306