Configuring A Terminal Service Resource Policy (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Configuring secure access devices guide
Hide thumbs Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01:
Table of Contents

Advertisement

Configuring a Terminal Service Resource Policy (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
When you enable the terminal services feature for a role, you need to create resource
policies that specify which remote servers a user can access.
To configure a terminal services resource policy:
In the navigation tree, select Device Manager > Devices. Click the Device Tree tab,
1.
and then double-click the Secure Access device for which you want to configure a
terminal services resource policy.
Click the Configuration tab. Select Users > Resource Policies > Terminal Services.
2.
Add or modify settings as specified in Table 36 on page 149.
3.
Click one:
4.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 36: Configuring Terminal Service Resource Policy Details
Option
Function
Access Control > General tab
Name
Specifies the name for the policy.
Description
Describes the policy.
Resources
Specifies the servers to which this
policy applies.
Applies to
Applies the policy to all the roles,
roles
and to the roles that are mapped
and not mapped in the Role
Selection section.
Action
Allows or denies access to the
servers specified in the Resources
list.
Chapter 10: Configuring Secure Access Resource Policies
Your Action
Enter the name.
Enter the description.
Enter the server path.
Select one of the following options from
the drop-down list:
All—Applies the policy to all users.
Selected—Applies the policy only to
users who are mapped to roles in the
Role Selection section.
Except those selected—Applies this
policy to all users except for those who
map to the roles in the Role Selection
section.
Select one of the following options from
the drop-down list.
Allow—Allows access to the servers
specified in the Resources list.
Deny—Denies access to the servers
specified in the Resources list.
Detailed Rules—Allows you to specify
one or more detailed rules for this policy.
149

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network and security manager

Table of Contents