Policy Condition Icmpcode - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

policy condition icmpcode

Configures an ICMP code value to use for traffic classification.
policy condition condition_name icmpcode code
policy condition condition_name no icmpcode
Syntax Definitions
condition_name
code
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
Use the no form of the command to remove an ICMP code value from a condition; however, at least one
classification parameter must be associated with a condition.
Examples
-> policy condition cond12 icmpcode 150
Release History
Release 6.1; command was introduced.
Related Commands
policy condition
policy condition icmptype
qos apply
show policy condition
page 33-86
The name of the condition.
The ICMP code value, in the range 0–255.
Creates a policy condition.
Configures an ICMP type value for traffic classification.
Applies configured QoS and policy settings to the current configuration.
Shows information about policy conditions configured on the switch.
QoS Policy Commands
OmniSwitch CLI Reference Guide June 2012