Show Port Mapping Status - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show port mapping status

Displays the status of one or more port mapping sessions.
show port mapping [port_mapping_sessionid] status
Syntax definitions
port_mapping_sessionid
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you do not specify the port mapping session ID, then the status of all the port mapping sessions will be
displayed.
Examples
-> show port mapping status
SessionID
-------------+----------------+---------------
8
output definitions
SessionID
Direction
Status
Release History
Release 6.6.1; command was introduced.
page 28-8
The port mapping session ID. Valid range is 1 to 8.
Direction Status
bi disable
Displays the port mapping session ID.
Displays the direction of a port mapping session.
Displays status of a port mapping session.
OmniSwitch 6250 CLI Reference Guide
Port Mapping Commands
November 2009