Policy Condition Source Vlan - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

policy condition source vlan

Configures a source VLAN for a policy condition.
policy condition condition_name source vlan vlan_id
policy condition condition_name no source vlan
Syntax Definitions
condition_name
vlan_id
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of the command to remove a source VLAN from a policy condition; however, at least
one classification parameter must be associated with a condition.
•
The source vlan policy condition classifies double-tagged traffic (for example, VLAN Stacking pack-
ets) based on the value of the outer VLAN tag of the packet. Use the inner source vlan policy condi-
tion to classify double-tagged traffic based on the value of the inner VLAN tag of the packet.
•
A source VLAN ID and a source VLAN group cannot be specified in the same condition. However, a
source VLAN ID or group and an inner source VLAN ID or group can be specified in the same condi-
tion.
Examples
-> policy condition cond5 source vlan 3
-> policy condition cond6 source vlan 150 inner source vlan 500
-> policy condition cond7 source vlan 300 inner source vlan group invlan1
Release History
Release 6.1; command was introduced.
page 33-108
The name of the condition. May be an existing condition name or a new
condition.
The source VLAN ID for the flow.
QoS Policy Commands
OmniSwitch CLI Reference Guide June 2012