Table of Contents
Advertisement
mfr bundle-name
Syntax
mfr bundle-name [ name ]
undo mfr bundle-name
View
MFR interface view
Default level
2: System level
Parameters
name: Bundle identification, which is a string of 1 to 49 characters.
Description
Use the mfr bundle-name command to set frame relay bundle identifier (BID).
Use the undo mfr bundle-name command to restore the default.
By default, the BID of an MFR bundle is represented by MFR plus frame relay interface number, for
example, MFR6/1/12.
You cannot configure a BID as a string in the form of MFR + number.
Each MFR bundle has a BID, and the peer router can identify an MFR bundle by BID. Different BIDs can
be used at the two ends of a link.
Examples
# Set the BID of MFR interface MFR 6/1/12 to bundle1.
<Sysname> system-view
[Sysname] interface MFR 6/1/12
[Sysname-MFR6/1/12] mfr bundle-name bundle1
mfr fragment
Syntax
mfr fragment
undo mfr fragment
View
MFR interface view
Default level
2: System level
Parameters
None
Description
Use the mfr fragment command to enable fragmentation on the MFR bundle.
Use the undo mfr fragment command to disable the function.
90
Advertisement
Table of Contents
