Snmp Trap Link-Status - Avaya G250 Reference

snmp trap link-status

Use the snmp trap link-status command to enable Link Up and Link Down traps. Use
the no form of this command to restore the default value, interface traps deactivated.
Syntax
[no] snmp trap link-status
User level
read-write
Context
Interface: Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR L2, DS1 FR-SUB L2, DS1 FR-SUB
L2-L3, USP PPP L2, USP PPP L2-L3, USP FR L2), FastEthernet (L2, L2-L3), Tunnel (L2,
L2-L3)
Related commands - SNMP access configuration
ip snmp-server,
snmp, show snmp
snmp user, show snmp user
community, snmp-server
user, snmp-server view
Related commands - SNMP trap configuration
clear snmp trap,
snmp-server host,
set snmp community,
engineID, show snmp
summary,
engineID, snmp-server
set port trap, set snmp
snmp-server informs
set snmp retries, set snmp
group, show snmp
show snmp usertogroup,
group, snmp-server
trap, show snmp, snmp-server enable
Alphabetical listing of CLI commands
timeout, show port
retries, show snmp timeout,
show snmp view,
remote-user,
notifications,
Issue 1.1 June 2005
trap, show
show
snmp-server
snmp-server
737