Snmp-Server Engineid - Avaya G250 Reference

Related commands - SNMP access configuration
ip snmp-server,
snmp, show snmp
snmp user, show snmp user
community, snmp-server
user, snmp-server view
Related commands - SNMP trap configuration
clear snmp trap,
host, snmp-server informs
Related commands - Dynamic trap manager
snmp-server dynamic-trap-manager

snmp-server engineID

Use the snmp-server engineID command to specify the SNMP Engine ID for the G350.
Use the no form of the command to return the device to its default Engine ID.
Note:
The SNMP Engine ID must be unique for all devices on the network.
Note:
Note:
When you change the SNMP Engine ID, all users other than the default user are
Note:
invalidated and must be redefined.
Note:
When the IP address of the G250/G350 changes, the SNMP Engine ID is
Note:
automatically changed.
Syntax
snmp-server engineID engineID
no snmp-server engineID
Parameters
Parameter
engineID
set snmp community,
engineID, show snmp
summary,
engineID, snmp-server
set port trap, set snmp
Description
12 byte hexadecimal string, with each byte
separated by a colon. For example,
00:00:00:81:0a:fe:ff:12:97:33:45:12.
set snmp retries, set snmp
group, show snmp
show snmp usertogroup,
group, snmp-server
trap, show snmp, snmp trap
Alphabetical listing of CLI commands
timeout, show port
retries, show snmp timeout,
show snmp view,
remote-user,
link-status, snmp-server
Possible Default
Values Value
Issue 1.1 June 2005
trap, show
show
snmp-server
snmp-server
741