show ip dhcp-server bindings
A binding is an assignment of an IP address to a client. Use the show ip dhcp-server
bindings command to display bindings.
Syntax
show ip dhcp-server bindings
Parameters
User level
read only
Context
general
Example
To display all IP address allocations to clients:
G350-001(super)# show ip dhcp-server bindings
IP Address
----------
3.3.3.2
3.3.3.3
Output fields
Name
IP Address
Lease Expiration
(seconds)
Type
Client-Identifier
Lease Expiration (seconds) Type
------------------
Infinite
303244
Description
The IP addresses allocated/reserved by the DHCP server.
The length of time that the IP address is kept for a specific client-id/
MAC address.
The type of address allocation. Options are:
Automatic — Dynamic IP address allocation.
Manual — Static IP address allocation or a specific client-id,
according to user configuration.
The distinct identification of the DHCP client in
dotted-hexadecimal notation. Note that the client-identifier for
Ethernet stations is the MAC address, preceded by 01.
Alphabetical listing of CLI commands
Client-Identifier
--------
------------------
Automatic
01:00:11:22:33:44:55
Manual
01:00:11:22:33:44:56
Issue 1.1 June 2005
593