Set Port Point-To-Point Admin Status - Avaya G250 Reference

CLI Commands
User level
read-write
Context
general
Example
To disable autonegotiation on port 1, module 4:
G350-147# set port negotiation 4/1 disable
Link negotiation protocol disabled on port 4/1.
Related commands
set port auto-negotiation-flowcontrol-advertisement,
edge admin state,
point-to-point admin
auto-negotiation-flowcontrol-advertisement,

set port point-to-point admin status

Use the set port point-to-point admin status command to manage the connection
type of the port.
Note:
This command is not supported by the G250.
Note:
Syntax
set port point-to-point admin status module/port admin_status
452 Avaya G250 and Avaya G350 CLI Reference
set port enable, set port
status, set port speed,
set port disable,
flowcontrol, set port level,
show port
show port edge state,
set port duplex, set port
set port name, set port
show port flowcontrol