Snmp-Server User - Avaya G250 Reference

CLI Commands
Example
G350-001(super)# snmp-server remote-user john
00:02:00:81:00:d0:00:4c:18:00 L2Group
Related commands - SNMP access configuration
ip snmp-server,
snmp, show snmp
snmp user, show snmp user
community, snmp-server
Related commands - SNMP trap configuration
clear snmp trap,
enable notifications,
Related commands - Dynamic trap manager
snmp-server dynamic-trap-manager

snmp-server user

Use the snmp-server user command to configure settings for an SNMPv3 user. If the user
does not exist, it is created. Use the no form of the command to remove the user from specific
groups. If no groups are specified, the user is removed from all groups.
Syntax
snmp-server user username groupname {v1|v2c|v3} [auth {md5|sha}
auth-password [priv des56 priv-password]] [volatile]
no snmp-server user username [groupname {v1|v2c|v3}]]
Parameters
Parameter
username
groupname
v1
750 Avaya G250 and Avaya G350 CLI Reference
set snmp community,
engineID, show snmp
summary,
engineID, snmp-server
set port trap, set snmp
snmp-server host,
Description
A character string no longer than 32
characters, specifying the username of this
user
A character string no longer than 32
characters, specifying the groupname this
user is associated with
The user is authorized for SNMP v1
functionality in the specified group
set snmp retries, set snmp
group, show snmp
show snmp usertogroup,
group, snmp-server
trap, show snmp, snmp trap
snmp-server informs
timeout, show port
retries, show snmp timeout,
show snmp view,
user, snmp-server view
link-status, snmp-server
Possible
Values
trap, show
show
snmp-server
Default
Value