Show Ip Active-Lists - Avaya G250 Reference

show ip active-lists

Use the show ip active-lists command to display information about a specific policy list
or all lists.
Syntax
show ip active-lists [list_index | list_type]
Parameters
Parameter
list_index
list_type
User level
read-only
Context
general
Example
G350-001(super)# show ip active-lists
Interface Name
-------------------------------- ---- -------- --- ----------------
FastEthernet 10/2
FastEthernet 10/2
FastEthernet 10/2
FastEthernet 10/2
FastEthernet 10/2
Vlan 1
Vlan 1
Vlan 1
Vlan 1
Description
The index of the policy list to view
The type of list: ACL, Crypto, PBR, QoS
Dir. Type
In
In
Out
Out
---- Crypto
In
In
Out
Out
Alphabetical listing of CLI commands
Possible
Values
300-499
Idx List Name
ACL 300 Default ACL List
QoS 400 Default QoS List
ACL 300 Default ACL List
QoS 400 Default QoS List
901 list #901
ACL 300 Default ACL List
QoS 400 Default QoS List
ACL 300 Default ACL List
QoS 400 Default QoS List
Issue 1.1 June 2005
Default
Value
575