Keepalive (Ppp) - Avaya G250 Reference

CLI Commands
Example
G350-001(super if:Tunnel 1)# tunnel keepalive 10 3
Related commands
tunnel checksum,
tunnel ttl

keepalive (PPP)

Use the keepalive command in a PPP interface to enable PPP keepalive, in order to
maintain a persistent connection. Entering keepalive without a parameter returns the keepalive
to its default value. Use the no form of this command to disable PPP keepalive.
Syntax
[no] keepalive [seconds]
Parameters
Parameter
seconds
User level
read-write
Context
Interface: Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR L2, USP PPP L2, USP PPP L2-L3,
USP FR L2)
Example
To enable PPP keepalive, and generate a message every 300 seconds:
G350-001(if:Serial 2/1)# keepalive 300
Related commands
encapsulation,
316 Avaya G250 and Avaya G350 CLI Reference
tunnel destination,
Description
The number of seconds between PPP
keepalive messages. Entering keepalive 0
disables keepalive.
ip address, ppp timeout
tunnel key, tunnel path-mtu-discovery,
ncp, ppp timeout retry,
tunnel source,
Possible Default
Values Value
0-32767 10
show interfaces