Client-Identifier - Avaya G250 Reference

Parameters
Parameter
vlan_id
name
vlan_name
User level
read-write
Context
general
Example
To delete VLAN 100:
G350-001(super)# clear vlan 100
This command will assign all ports on vlan 100 to their default in the
entire management domain - do you want to continue (Y/N)?
VLAN 100 deletion successful
Related commands
clear port static-vlan, icc-vlan,
vlan-binding-mode,
trunk, show vlan

client-identifier

Use the client-identifier command to configure a reservation/manual pool. A
reservation/manual pool reserves one IP address for a specific client. This command specifies a
unique identifier for the client. The pool for which you configure a client identifier must contain
one IP address only. This means that the start and end IP addresses of the pool must be equal.
The DHCP server uses the client identifier to recognize the DHCP client and allocates the
reserved IP address to the client. Use the no form of this command to clear a specified unique
identifier for a DHCP client.
Description
The VLAN number
Keyword specifying to identify the VLAN by
the VLAN name.
The VLAN name.
If you wish to enter a name which includes
spaces, you must enclose the entire name
in quotation marks, for example "new york".
interface vlan,
set trunk, set vlan, show cam
Alphabetical listing of CLI commands
set port static-vlan, set port
vlan, show port vlan-binding-mode,
Possible Default
Values Value
y
vlan, set port
show
Issue 1.1 June 2005 95