ip vrrp timer
Use the ip vrrp timer command to set the virtual router advertisement timer value for the
virtual router ID. Use the no form of this command to restore the default value.
Syntax
[no] ip vrrp vr_id timer value
Parameters
Parameter
vr_id
value
User level
read-write
Context
Interface: FastEthernet (L2-L3, L2), VLAN (L2-L3, L2)
Example
To set the virtual router advertisement timer value for virtual router 3 to 2 seconds:
G350-001(if:Vlan 2)# ip vrrp 3 timer 2
Related commands
ip
vrrp,
ip vrrp
address,
primary,
ip vrrp
Description
The virtual router ID
The advertisement transmit time in seconds
ip vrrp
auth-key,
priority,
router
vrrp,
show ip vrrp
Alphabetical listing of CLI commands
ip vrrp override addr
owner,
Possible
Default
Values
Value
1-255
1-255
ip vrrp
preempt,
ip vrrp
Issue 1.1 June 2005
301