Show Logout - Avaya G250 Reference

Context
general
Example
To display filter conditions defined for console messaging:
G350-001(super)# show logging session condition
Logging console: enabled
Logging session severity: warning
Facility
-------------
System
Related commands
clear logging file,
access-level, set logging server
facility, set logging

show logout

Use the show logout command to display the amount of time in minutes the terminal remains
idle before timing out. If the logout value is 0, there is no timeout limit. The default logout value
is 15 minutes.
Syntax
show logout
User level
read-only
Context
general
Example
To display the timeout value:
G350-001(super)# show logout
CLI timeout is 15 minutes
Related commands
exit, reset, set logout
Severity Override
-----------------------
Critical
clear logging server, set logging
condition,
session, show logging file
Alphabetical listing of CLI commands
file, set logging
set logging server enable/disable,
content, show logging server condition
server, set logging server
set logging server
Issue 1.1 June 2005 647