Dynamic-Cac - Avaya G250 Reference

dynamic-cac

Use the dynamic-cac command to set the dynamic CAC bearer bandwidth limit for the current
interface. You can also specify an activation priority for the interface. In case more than one
interface with a BBL value is up, the G250/G350 reports the BBL of the interface with the
highest activation priority.
Syntax
dynamic-cac bbl [activation_priority]
Parameters
Parameter
bbl
activation_
priority
User level
read-write
Context
Interface: serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR-SUB L2, DS1 FR-SUB L2-L3, USP
PPP L2-L3, USP PPP L2), FastEthernet (L2, L2-L3), Tunnel (L2, L2-L3)
Related commands
show dynamic-cac
Description
The bearer bandwidth for the current
interface
The priority value of this interface
Alphabetical listing of CLI commands
Possible
Values
0-100,000,000
Kbits/sec
1-255
Issue 1.1 June 2005
Default
Value
-1
50
179