CLI Commands
set port powerinline
Use the set port powerinline command to enable or disable the load detection process
on the port. The load detection process is used to power devices using Power over Ethernet
(PoE).
Syntax
set port powerinline module_number/port_number {enable | disable}
Parameters
Parameter
module_number
port_number
enable
disable
User level
read-write
Context
general
Example
To enable load detection on ports 3/1, 3/2, and 3/3 of the G350:
G350-001(super)# set port powerinline 3/1-3 enable
To enable load detection on ports 10/3, 10/4, and 10/5 of the G250:
G350-001(super)# set port powerinline 10/3-5 enable
Related commands
set port powerinline
powerinline trap
454 Avaya G250 and Avaya G350 CLI Reference
Description
The module number
The port number. A range of ports can also
be specified. For example, to specify ports
1-3 on module 3 of the G350, use the syntax
3/1-3. To specify ETH LAN ports 3-5 on the
front panel of the G250, use the syntax 10/
3-5.
Enable load detection on this port
Disable load detection on this port
priority,
set port powerinline
enable,
show powerinline
type,
set powerinline trap
Possible
Default
Values
Value
disable,
set