CLI Commands
speed (interface)
Use the speed command to control the speed setting for the interface.
Note:
This command functions only in no autoneg mode.
Note:
Syntax
speed speed_rate
Parameters
Parameter
speed_rate
User level
read-write
Context
Interface: FastEthernet (L2, L2-L3)
Example
To set the interface speed to 100MB:
G350-001(if:FastEthernet 10/2)# speed 100MB
Related commands
autoneg, duplex,
756 Avaya G250 and Avaya G350 CLI Reference
Description
The interface speed
shutdown
(interface),
traffic-shape rate
Possible
Default
Values
Value
10MB, 100MB