Loopback Diag; Loopback Local - Avaya G250 Reference

CLI Commands
Related commands
description (ip
show ip crypto-list

loopback diag

Use the loopback diag command to activate a Loopback signal on the Serial interface. Use
the no form of the command to deactivate the Loopback signal.
Syntax
[no] loopback diag
User level
read-write
Context
Interface: Controller
Example
To activate a Loopback signal on the current interface:
G350-001(if:Serial 5/1)# loopback diag
Related commands
loopback local,

loopback local

Use the loopback local command to activate a Loopback signal on the Serial interface. Use
the no form of the command to deactivate the Loopback signal.
Syntax
loopback local loopback_type
no loopback local
324 Avaya G250 and Avaya G350 CLI Reference
rule), destination-ip, ip
loopback remote
crypto-list, ip-rule (VPN), protect crypto map, source-ip,