Show Ip Active-Pbr-Lists - Avaya G250 Reference

CLI Commands
Output fields
Name
Interface Name
Dir.
Type
Idx
List Name
Related commands - Policy-based routing
ip next-hop-list,
Related commands - VPN
clear crypto isakmp,
sa, show crypto ipsec
show crypto isakmp

show ip active-pbr-lists

Use the show ip active-pbr-lists command to display details about a specific PBR list
or all PBR lists.
Syntax
show ip active-pbr-lists {list_number}
576 Avaya G250 and Avaya G350 CLI Reference
Description
The name of the interface on which the list is operating.
The direction of traffic on which the list is operating. Options are:
In — The list is operating on incoming traffic.
Out — The list is operating on outgoing traffic.
The type of list. Options are:
ACL — Access Control List. Controls which packets are
authorized to pass through the interface.
QoS — QoS List. Can change the value of the QoS field in a
packet.
PBR — Policy-Based Routing List. Determines the routing of
packets that match the rules defined in the list.
Crypto — IPSec Crypto List. Provides encryption rules for VPN
traffic that needs protection.
The ID of the list. List IDs must be within the following range:
ACL — 300-399.
QoS — 400-499.
PBR — 800-899.
Crypto — 900-999.
The name of the list, as determined by the
ip pbr-group, ip pbr-list,
clear crypto sa, clear crypto sa
transform-set, show crypto isakmp
policy, show crypto isakmp
show ip active-pbr-lists,
counters,
peer,
sa, show crypto
name command.
show ip pbr-list
ip crypto-list, show crypto ipsec
show crypto isakmp peer-group,
map, show ip crypto-list