Show Ppp Authentication; Show Protocol - Avaya G250 Reference

CLI Commands
Related commands
set port powerinline,
disable, set powerinline trap enable

show ppp authentication

Use the show ppp authentication command to show the PPP authentication status.
Syntax
show ppp authentication
User level
Read only
Context
Ethernet interface
Example
G350-001(super)# show ppp authentication
PAP sent-username: configured
CHAP refuseCHAP hostname: G350
CHAP password: not configured
Related commands
encapsulation
pppoe-client persistent
pppoe-client wait-for-ipcp

show protocol

Use the show protocol command to display the status of a specific management protocol,
or all protocols.
Syntax
show protocol [ssh|telnet-client|ssh-client|https|snmp|telnet|http|scp
|icmp|recovery-password|ftp-client|tftp|dhcp|dns-client]
676 Avaya G250 and Avaya G350 CLI Reference
set port powerinline
pppoe, mtu, ppp chap
delay, pppoe-client persistent
priority, set port powerinline
hostname, ppp chap password,
max-attempts,
type, set powerinline trap
ppp pap-sent username,
pppoe-client service-name,