Interface Tunnel - Avaya G250 Reference

CLI Commands
Related commands
description (interface),
tunnel, interface
crypto-group, load-interval,

interface tunnel

Use the interface tunnel command to enter Interface Tunnel configuration mode. Use the
no form of this command to delete an interface tunnel.
If the specified interface does not exist, the system creates it and enters its configuration mode.
Syntax
[no] interface tunnel tunnel_number
Parameters
Parameter
tunnel_number
User level
read-write
Context
general
Example
To create interface tunnel 1 and enter its configuration mode:
G350-001(super)# interface tunnel 1
Related commands - IP interface configuration
description (interface),
serial, interface
load-interval, show ip interface brief
Related commands - GRE tunneling
interface FastEthernet,
216 Avaya G250 and Avaya G350 CLI Reference
interface Console,
usb, interface vlan, ip
show ip interface brief
Description
The number of the interface
interface Console,
usb, interface vlan, ip
tunnel dscp, tunnel mode
interface FastEthernet,
address, ip admin-state,
interface FastEthernet,
address, ip admin-state,
interface Loopback,
ip broadcast-address,
Possible Default
Values Value
1-99
interface Loopback,
ip broadcast-address,
interface
ip
interface