Example
To create QoS list 440 and enter its configuration context:
G350-012# ip qos-list 440
G350-012(QoS 440)#
Related commands
ip
access-control-list,
pre-classification,
ip redirects
Use the ip redirects command to enable the sending of redirect messages on the current
interface. Use the no form of this command to disable redirect messages. By default, sending of
redirect messages on the interface is enabled.
Syntax
[no] ip redirects
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3), VLAN (L2-L3, L3)
ip rip authentication key
Use the ip rip authentication key command to set the authentication string used on the
current interface. Use the no form of this command to clear the password.
Syntax
ip rip authentication key password
no ip rip authentication key
ip
access-group,
ip
show ip
access-control-list,
Alphabetical listing of CLI commands
policy-list-copy,
ip
qos-group,
show ip qos-list
ip
simulate,
Issue 1.1 June 2005
271