Rtp-Stat Event-Threshold - Avaya G250 Reference

CLI Commands

rtp-stat event-threshold

Use the rtp-stat event-threshold command to set thresholds on the QoS event
counters incremented by the RTP statistics application. If one or more event threshold is
exceeded during an RTP stream and the RTP statistics application is configured to generate
QoS SNMP traps, a trap is generated upon termination of the RTP stream. Use the rtp-stat
qos-trap command to configure the RTP statistics application to automatically generate QoS
traps. Use the rtp-stat threshold command to configure the QoS metric thresholds. Event
thresholds should be configured such that the sending of a trap corresponds to a customer's
actual experience of QoS problems during the stream.
Syntax
rtp-stat event-threshold
{all|codec-loss|codec-rtt|echo-return-loss|loss|remote-loss|rtt|
jitter|remote-jitter|ssrc-change} num
no rtp-stat event-threshold
{all|codec-loss|codec-rtt|echo-return-loss|loss|remote-loss|rtt|
jitter|remote-jitter|ssrc-change}
Parameters
Parameter
all
codec-loss
codec-rtt
echo-return-loss
loss
remote-loss
rtt
376 Avaya G250 and Avaya G350 CLI Reference
Description
Sets all event thresholds to
the specified number
Sets the event threshold for
the codec-loss metric
Sets the event threshold for
the codec-rtt metric
Sets the event threshold for
the echo-return-loss metric
Sets the event threshold for
the loss metric
Sets the event threshold for
the remote-loss metric
Sets the event threshold for
the rtt metric
Possible Values Default Value