Show Queue - Avaya G250 Reference

CLI Commands

show queue

Use the show queue command to display information about the real-time status of output
queues for the current interface.
Note:
This command is only applicable in fair-voip-queue mode.
Note:
Syntax
show queue type identifier
Parameters
Parameter
type
identifier
User level
read-only
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR L2, USP FR L2, USP PPP L2,
USP PPP L2-L3), FastEthernet (L2, L2-L3) - when traffic shaping is configured
Examples
G250-001(super)# show queue FastEthernet 10/2
G350-001(super)# show queue Serial 3/1:2
Related commands
interface FastEthernet,
signal, show ip
680 Avaya G250 and Avaya G350 CLI Reference
Description
The type of interface
The identifier depends on the interface type:
For Fast Ethernet: module/port
For Serial:
module/port:channel-group
interface serial, queue-limit,
qos-list, show voip-parameters,
Possible
Values
Fast Ethernet
Serial
channel-group:
E1: 0-30
T1: 0-23
set qos bearer, set qos
voip-queue-delay
Default
Value
control, set qos