Show Flows - Avaya G250 Reference

show flows

Use the show flows command to display information about the real-time status of micro-flows
within output queues for the current interface.
Note:
This command is only applicable in fair-voip-queue mode.
Note:
Syntax
show flows type identifier
Parameters
Parameter
type
identifier
User level
read
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR L2, USP FR L2, USP PPP L2,
USP PPP L2-L3), FastEthernet (L2, L2-L3) - when traffic shaping is configured
Examples
G350-001(super)# show flows FastEthernet 10/2
G350-001(super)# show flows Serial 3/1:2
Description
The type of interface
The identifier depends on the
interface type:
For Fast Ethernet: module/port
For Serial:
module/port:channel-group
Alphabetical listing of CLI commands
Possible Values Default Value
Fast Ethernet
Serial
channel-group:
E1: 0-30
T1: 0-23
Issue 1.1 June 2005 559